Видео

yes - we have some new shorter versions coming later in the summer of 2024.

Thanks so much for the kind words - hope you really enjoy the stem!

Appreciate the feedback - we have many products that have been in the works for a while and we are always working on multiple things at the same time but sometimes design and manufacturing takes longer on certain products. All that being said, we are just finishing up production on shorter stems so stay tuned

thanks for the feedback - definitely something we are looking at for the future. thanks

Thanks for the feedback! I'll pass it along to the engineers :)

Thanks for the question and you are certainly correct that securing the grip prior to the cables could be a useful way to allow you to adjust cables in the future without having to touch the grips. There is no reason you can't do it this way. Thanks

You are in luck! we have a 41cm in both a 25 deg and a 10 deg flare coming in the fall so stay tuned :)

Hi @patgregoire1 - this video is pretty accurate for the new PRO Endurance post. Since it uses the same pre-load adjustment as the Endurance post all of that is the same. The only real difference from a user standpoint is what is inside the post and what one might swap in and out in terms of springs and elastomers - but the detailed info on that can be found in the paper instructions. If you have any specific questions or need any help you can always email us at support@redshiftsports.com - Thanks

thanks for the feedback - much appreciated and hope you enjoy the stem.

Thanks - glad you like it

glad you like it! And bikepacking is definitely one of the great use cases

The grips are specifically designed to fit on 23.8mm round bar which is the standard diameter for round drop bars. They will fit on an aero handlebar section if the front side of it is 23.8mm and circular but if it is not shaped like a circle on the front where contact would be made them the fit might not be that great. Thanks

Hi @owlinthewood - we sell direct to folks in the UK (and also the EU for that matter). We keep inventory in the UK (and EU) so shipping is free and fast and we offer free returns and exchanges for 90 days after receiving any of our products. You can purchase right here: redshiftsports.com/products/top-shelf-handlebar-system - and if you have any question feel free to reach out to us at support@redshiftsports.com - thanks

Thanks so much and really glad you like them!

So happy to hear that!

Hi there - I am guessing you have the 80mm version which includes a 2nd tool for installing the wedge - this tool is used to seat the wedge in place and then it is secured with the silver bolt and the install tool is removed. If you visit our website you can find instructions and videos for the 80mm version (there is also a link at the beginning of this video). And if you have any questions you can always email us at support@redshiftsports.com

@@Redshiftsports many thanks 👍👍 do you do a spare silver bolt for the 80mm stem ?

@@addiecusack1530 yes, please email us at support@redshiftsports.com and we can help you with that and any other spare parts you might need. Thanks!

@@Redshiftsports you guys have been brilliant . Your service is outstanding well done to all involved 👍👍

So glad to hear that it worked out! Thanks so much for the kind words!

I assume you mean the kitchen sink loop - thanks so much for the great feedback and something for us to think about for the future.

Hi Matty - thanks for checking it out. With out handebars we try to cover a pretty wide range of widths so we use 3mm increments with 50mm as the first point and then we went by 3s and that is how we ended up with 44, 47, 50, and 53. Hope that helps.

I agree 42 is the sweet spot for the vast majority of riders. I’d buy these but 44 is just too wide

@@Redshiftsports Sorry but this did not really explain why you opted to not offer a 41cm version (if you want to stick to your increments).. also a less extreme flare variant would be much appreciated! If it wasn’t for those over the top design choices I’d have bought two already

@@rebootyourmind Thanks for asking for clarification - you are right that I didn't actually explain why we stopped at 44cm. The Top Shelf was made to match up with our kitchen sink handlebar that was primarily designed for gravel and primarily designed as a "wide" bar for gravel bikes and when we developed it we wanted to emphasize that it was a wide bar so we stopped at 44cm to be slightly differentiated from other gravel bars. But, we have had so much feedback from folks who are interested in less width on the top shelf that we are going to add the 41cm version as well as doing all the widths in a less flared 10 deg variant as well. So, stay tuned for those version and thanks for adding your voice!

Nice! Hope you love it!

Glad you like it!

Thanks! Glad you like it!

And a bike.

Glad you like it and great advice - hopefully this will help some folks who already have a fit and are having to do a lot of extreme stuff to get the reach and rise setup properly. Thanks.

That is correct @user-gm8ll5hs4x - this video was made 4 years ago but we updated the guidance on springs and tuning more recently to try to make it a bit more clear. Also, if you have a PRO seatpost then the whole setup is completely different you can check out website for the most up to date videos: redshiftsports.com/pages/faq-instructions - thanks

Hi @shaifulothman7442 - if you go to 6:37 in the video you will see the discussion on removing the preload wedge. Please note that for newer stems the bolt is a torx not a hex and you can see this in the instructions that came with your stem. Hope that helps but if you have any additional questions you can email us at support@redshiftsports.com - thanks

Yes - as long as your handlebar is "clip on compatible" then these are safe for your bar. Usually carbon bars will say if clip on aerobars are okay to use which is an indication that the area near the stem clamp has been sufficiently reinforced. And if it is not indicated you can contact the manufacturer and they will know what you are talking about. Hope that helps!

You are correct that the elastomers always need to be in the top - and good eyes noticing they were on the bottom at first - that was because we installed in the -6 deg and needed to swap them from default. The stem is ready to ride out of the box and we actually recommend everyone give it a try if they want the +6 deg orientation and see how it feels and then adjust from there. Thanks

@@Redshiftsports Thanks for the fast reply - after rewatching the video and listing carefully, i noticed why it was kinda "flipped" first. Had my first ride yesterday and it was a blast! Cheers

@@honkx so glad the stem is feeling good!

great question - I actually don't know but you can message @ilgravel on instagram and I am sure they would be happy to share that info. Thanks

It’s a Stem cap mount from Ali express

@@wilsonl9397 Thanks mate.

hi @stormlaker - hope you enjoy all the products on your road bike. in this video we are showing the versatility of a gravel bike which is why you see it being used on a variety of terrain. thanks

Currently just USB!

Thanks for the quick reply. Any current plans for USB-C in the future?@@Redshiftsports

Our pleasure @@anywhereroam9698 - we are considering USB-C for the future but its not currently in any near term design updates. But thanks for the feedback.

Hello - you are right and sorry for any confusion. We made a change to a torx bolt a couple years ago which is a while after this video was put up. All the best!

Hey it’s all good. Love the product. Ordered a second one for another bike. Just curious why you switched to torx from 3mm. Seems a thing now. Liked it better when all bike stuff was hex.

@@sdanjohn glad you are loving the product and ordered a 2nd one! The switch to torx was actually just practical - we were trying to do as much as we could to ensure that it was hard to strip the internal wedge bolt - on the whole hex is a little easier to strip so we made the change and included a tool to make sure everyone had the right one. Thanks again for the feedback

@littlefish4270 glad you found the video helpful and very happy that the stem is working so well for you.

Yes - you can absolutely use the stem with a jones H bar. The one thing to keep in mind is that the stem will be a lot less active when your hands are in the close grips since that position can be close to the pivot point on the stem but when the hands are on the other positions you will get an active suspension. Thanks

Sorry that you had trouble with these instructions. We added an 80mm version that has a different elastomer install and removal process but that video is linked inside this one so sorry that you did not see that. Here it is: ruclips.net/video/TRIt8zyUYvY/видео.html

Thanks Brain - so glad you are enjoying your seatpost!

So awesome to hear - glad you are loving them!

thanks so much

​@@Redshiftsportsyoure most welcome ❤

The bike shops for free in the US but if the winner is outside the US they will have to chip in for the shipping and taxes do depend on location. Thanks

good luck!